Composition and structure of radiator
Release time:
2025-03-21
The automobile radiator is an indispensable and important component in the cooling system of automobile water-cooled engines, and is developing towards lightweight, efficient, and economical direction. The structure of car radiators is constantly adapting to new developments.
The core of a tube type radiator is composed of many thin cooling tubes and fins. The cooling tubes mostly have a flat circular cross-section to reduce air resistance and increase heat transfer area.
The core of the radiator should have sufficient flow area to allow the coolant to pass through, as well as sufficient air flow area to allow enough air to pass through to remove the heat transferred from the coolant to the radiator. At the same time, it must also have sufficient heat dissipation area to complete the heat exchange between the coolant, air, and heat sink.
A tube and belt radiator is made up of corrugated heat dissipation belts and cooling pipes arranged alternately and welded together.
Compared with the tube type radiator, the tube type radiator can increase the heat dissipation area by about 12% under the same conditions. In addition, there are louver like holes on the heat dissipation belt that disturb the airflow to break the adhesion layer of the flowing air on the surface of the heat dissipation belt and improve the heat dissipation capacity.
recommend Content
Share