Use and maintenance of radiator
Release time:
2025-03-21
1. The radiator should not come into contact with any acid, alkali, or other corrosive properties.
2. It is recommended to use soft water. Hard water should be softened before use to avoid internal blockage and scale formation in the radiator.
3. To avoid corrosion of the radiator, it is necessary to use long-term rust proof antifreeze produced by a reputable manufacturer and in compliance with national standards when using antifreeze.
4. During the installation of the radiator, please do not damage the radiator fins or bump the radiator to ensure its heat dissipation capacity and sealing.
5. When completely draining the radiator before refilling, first turn on the drain switch of the engine cylinder block. When water flows out, then turn it off to avoid water bubbles.
6. In daily use, the water level should be checked at all times, and water should be added after stopping the machine to cool down. When adding water, slowly open the water tank cover and keep the operator's body away from the water inlet as much as possible to prevent high-pressure steam from spraying out of the water inlet and causing burns.
7. In winter, to prevent the phenomenon of core rupture caused by icing, such as long-term parking or indirect parking, the water tank cover and drain switch should be removed to completely drain the water.
8. The effective environment for backup radiators should be kept ventilated and dry.
9. Depending on the actual situation, users should thoroughly clean the core of the radiator once every 1-3 months. When cleaning, rinse with clean water along the opposite wind direction.
10. The water level gauge should be cleaned every 3 months or, depending on the actual situation, each component should be removed and cleaned with warm water and non corrosive detergent.
Previous:
Next:
recommend Content
Share